Electrical · Dallas–Fort Worth, TX
Outdoor Lighting in Dallas, TX: Landscape, Security and Patio
Design and install LED outdoor lighting with safe wiring, controls and a written flat rate quote.
- Licensed & insured
- Upfront flat-rate pricing
- Same-day appointments
Need it handled today? Call +1 (614) 756-0643 · book online by email
Quick answer
Outdoor lighting in Dallas covers landscape lighting, path and step lights, security and flood lights, porch and entry lights and patio or deck lighting, mostly in efficient LED. Low voltage landscape lighting runs on a transformer at 12 volts, which is safe and easy to adjust, while security and wall lights run on household voltage and need weatherproof boxes and GFCI protection. Plumber Service TX designs and installs outdoor lighting across Dallas and Fort Worth, with a layout and a written flat rate quote before work begins.
Outdoor Lighting Types
| Type | Use | Power |
|---|---|---|
| Path and step lights | Safe walkways and entries | Low voltage |
| Uplights and accent lights | Trees, walls and architecture | Low voltage |
| Downlights, moonlighting | Soft light from trees or eaves | Low voltage |
| Security and flood lights | Driveways, yards and dark corners | Line voltage, often motion sensing |
| Porch and entry lights | Door and address | Line voltage |
| Patio, deck and pergola lights | Entertaining spaces | Low or line voltage |
| Pool and water lights | Pools and fountains | Special rated and bonded |
How to Plan Landscape Lighting
- Walk the property at dusk and mark paths, entries, features and dark spots.
- Decide on the mood: safety, security, display or entertaining.
- Choose fixtures and color temperature. 2700 K is warm and works well outdoors.
- Plan zones and a transformer with room to grow, and timers, photocells or smart controls.
- Install with buried, protected cable and watertight connections.
- Adjust at night and tune the aiming.
Need it handled today? Call +1 (614) 756-0643 · book online by email
Outdoor Lighting Safety and Code
- Outdoor outlets and circuits need GFCI protection. See GFCI outlets.
- Fixtures and boxes must be wet or damp rated for their location.
- Buried cable needs correct depth and protection.
- Line voltage work usually needs a permit.
- Keep lights shielded to avoid glare and light trespass.
- Use a timer, photocell or smart control to save energy.
Outdoor Lighting Across Dallas Fort Worth
We serve Dallas and the surrounding area, including Fort Worth, Arlington, Frisco and Southlake. Related: indoor lighting and electrical services. Email service@plumberservicetx.com or call +1 (614) 756-0643.
Why Outdoor Lighting Is Worth It
Outdoor lighting serves four purposes, and a good design addresses all of them. It makes the home safer, by lighting paths, steps and entrances to prevent falls. It improves security, by removing dark corners where intruders hide. It extends the use of outdoor spaces after dark, such as patios, decks and pools, which matters in a climate where evenings are the best time to be outside. And it shows off your home and landscaping, which adds curb appeal and can add to property value.
Outdoor lighting uses LED technology almost entirely now, with low energy use and long life, and it is controlled by timers, photocells and smart systems. A well designed system draws little power, and a poorly designed one creates glare, light trespass and wasted energy.
Low Voltage vs Line Voltage Outdoor Lighting
| Low voltage, 12 volt | Line voltage, 120 volt | |
|---|---|---|
| Power source | A transformer steps down household power to 12 volts | Standard household power |
| Safety | Lower shock risk, shallower burial allowed | Needs conduit or direct burial cable at required depth, GFCI protection |
| Installation | Easier, flexible, easy to change later | Needs more work and permits |
| Best for | Landscape, path, accent, deck and step lights | Security floodlights, wall lights, post lights, high output lights |
| Runs and voltage drop | Long runs lose voltage, so cable gauge and layout matter | Handles long runs better |
| Cost | Lower for most landscape projects | Higher in labor, lower per fixture in some cases |
| Control | Timers, photocells, smart controls at the transformer | Switches, timers, sensors and smart switches |
Many homes use both: line voltage for porch, garage and security lights, and low voltage for landscape lighting.
Landscape Lighting Techniques
- Path lighting. Low fixtures spaced evenly along walkways, giving pools of light, with enough overlap to avoid dark gaps.
- Uplighting. A fixture at the base aims up at a tree, wall or column, producing drama. Use narrow beams for tall trees and wider beams for walls.
- Downlighting or moonlighting. Fixtures mounted high in trees shine down, mimicking moonlight, with soft shadows.
- Wall washing and grazing. Light skims or washes a textured wall, such as stone or brick.
- Silhouetting and shadowing. A light behind a feature creates an outline, or in front of a plant creates a shadow on a wall.
- Step and wall lights. Built into risers and retaining walls for safety.
- Water feature lighting. Submersible LEDs for ponds, fountains and pools, rated for water.
- Deck and patio lights. Post cap, rail and under rail lights for evening use.
- Architectural lighting. Highlights the home’s features with wall fixtures and gutter mounted lights.
Security Lighting That Works
Studies of burglary suggest that well lit homes are less attractive to intruders, though results vary, and lighting works best as part of a layered approach. Effective security lighting is not about the brightest light. Glare can make it hard to see into shadows. A better approach uses even, shielded light at entry points, motion activated lights in side yards and the back of the house, lights near garage doors, and cameras with good illumination.
- Use motion sensors to catch attention and save energy.
- Aim sensors to avoid false triggers from trees, pets and the street.
- Light entry doors and garage doors with fixtures at a height that does not shine into eyes.
- Choose a warm or neutral color temperature, 3000 to 4000 K, for natural color in camera footage.
- Keep landscaping trimmed to avoid hiding places and blocking lights.
- Use dusk to dawn photocell fixtures or smart schedules.
- Be considerate of neighbors, with shielded fixtures that do not shine into their windows.
Weather and Durability in Texas
Outdoor fixtures face harsh conditions: extreme summer heat, UV, hail, driving rain, freezes and insects. Choose fixtures for the climate.
- Materials. Solid brass, copper, stainless steel, powder coated aluminum and UV stable plastics last longer than painted steel and thin plastic.
- Ratings. Wet location rated fixtures are required for exposed outdoor use, and damp rated fixtures are for covered porches.
- Sealing. Gaskets and sealed connections keep moisture out. Use waterproof wire connectors with gel filled caps.
- Heat management. LED drivers can fail when hot. Choose fixtures with good heat dissipation.
- Hail and impact. Place fixtures where they are protected, or choose tough lenses.
- Freeze protection. Low voltage cable and fixtures handle freezes well, and buried cable should be at the correct depth.
- Insects and debris. Seal gaps, since insects and spiders nest in fixtures.
Controls: Timers, Photocells, Sensors and Smart Systems
| Control | How it works | Best for |
|---|---|---|
| Photocell | Turns on at dusk and off at dawn | Security lights, porch lights, landscape lights |
| Astronomical timer | Follows sunrise and sunset times, with adjustable on and off times | Landscape lighting that needs to turn off at night |
| Motion sensor | Turns on when movement is detected | Security and utility lights |
| Smart transformer or switch | App control, schedules, scenes and zones | Homes with several zones, and holiday scenes |
| Dimmer | Adjusts brightness | Patio and deck lighting for mood |
| Wireless remote | Controls lights from a distance | Quick control on patios |
Smart outdoor lighting allows color changes, holiday themes and zoned control, so you can light the patio without lighting the front yard. We install and configure these, and make sure they work with your wifi and your other devices.
Outdoor Living Spaces: Patios, Pools and Outdoor Kitchens
North Texas homeowners spend a lot of time outside, so patios, covered porches, pools and outdoor kitchens need good lighting. Each has its own needs.
Patios and covered porches
Layer lighting with a ceiling fixture or fan with a light, wall sconces, and string or bistro lights for warmth. Use dimmers and warm color temperatures. Cover the electrical components with damp or wet rated enclosures.
Outdoor kitchens
Task lighting over the grill and the prep area, with bright, shadow free light, and ambient lights elsewhere. Lights should be rated for the heat and grease. Gas, electrical and lighting are best planned together. See gas line services.
Pools and spas
Pool lights are special, sealed fixtures, installed per code, bonded and GFCI protected. Only a licensed electrician should work on them. Landscape lights near pools must meet distance requirements.
Fire pits and seating areas
Low level lights, path lights and accent lights set the mood without overpowering the fire.
Driveways and parking areas
Bollard lights, wall lights and gate lights provide safety and security, and need sturdy fixtures.
Trees, gardens and water features
Uplighting and moonlighting turn the yard into a nighttime feature.
Holiday and Event Lighting
Permanent holiday lighting systems, with track mounted LED lights on the roof edge that can change color, are popular, and they avoid the annual ladder climb. Smart controllers let you set scenes for holidays and events. Temporary holiday lights need GFCI protected outlets, outdoor rated cords, and good management of the load on circuits. Do not overload outlets, and check lights for damage. An outdoor outlet on a switch inside the house, or in the soffit, makes it easier. We can install weatherproof outlets in the right places, and dedicated circuits for large displays.
Outdoor Lighting Problems and Fixes
| Problem | Likely cause | Fix |
|---|---|---|
| Some lights are dim or off | Voltage drop, bad connections, corroded splices | Rebalance the layout, replace connectors |
| Whole system is off | Tripped breaker or GFCI, failed transformer, timer | Check power and the controller |
| Lights flicker | Loose connections, moisture, bulb or driver issue | Reseal connections, replace parts |
| Lights stay on in daytime | Photocell failure or a blocked sensor | Clean or replace the photocell |
| Motion light triggers too often | Sensitivity, aim, wind and pets | Adjust the sensor |
| Water in fixtures | Failed seals or gaskets | Replace the fixture or the seals |
| Cut cable from digging | Lawn work, landscaping | Repair with waterproof connectors, mark the route |
| GFCI trips in the rain | Moisture in boxes or fixtures | Dry, seal, replace faulty parts |
Dark Sky Friendly and Considerate Lighting
Good outdoor lighting limits glare, light trespass and wasted light. Dark sky friendly practices help people, wildlife and the night sky, and they are also energy efficient.
- Use fully shielded fixtures that direct light downward.
- Choose warm color temperatures, 3000 K or lower for landscape, to reduce blue light.
- Use only as much light as needed, and avoid over lighting.
- Use timers and sensors to turn lights off when not needed.
- Keep light on your property, and avoid shining into neighbors’ windows.
- Check local ordinances and HOA rules, since some limit fixture types and brightness.
- Protect wildlife and sea turtles in coastal areas, and birds during migration, where relevant.
Outdoor Lighting Across Dallas Fort Worth
We install outdoor lighting in Dallas and the surrounding area, with teams in Fort Worth, Frisco and Southlake. See Fort Worth, Arlington, Frisco and Southlake. Related services include indoor lighting, GFCI outlets and surge protection. Email service@plumberservicetx.com or call +1 (614) 756-0643. Send photos of your yard at dusk, a sketch of the layout, and any HOA rules.
Planning Outdoor Lighting Step by Step
- Walk the property at dusk. Note paths, entries, steps, trees, walls, dark corners and views from inside and from the street.
- List your goals. Safety, security, entertaining, highlighting features and energy savings.
- Set a budget and a phase plan. Many homeowners start with safety and security, and add accent and landscape later.
- Choose zones. Front entry and path, driveway, side yards, backyard patio, pool, gardens and trees.
- Select fixtures and light levels. Aim for layered light with low glare. Outdoor areas need less light than indoor ones. Contrast matters more than brightness.
- Design the power layout. Locate transformers, power sources, GFCI outlets and the routes of the cable.
- Plan the controls. Timers, photocells, motion sensors and smart controls by zone.
- Check rules. HOA, local lighting ordinances and permits.
- Install, aim and adjust at night. Fixtures should be positioned and aimed after dark, to avoid glare and spill.
- Maintain. Clean lenses, trim plants and check connections yearly.
Light Levels, Color and Glare Outdoors
| Area | Typical light level | Notes |
|---|---|---|
| Path and walkway | Low, 1 to 5 foot candles | Even coverage without glare, shielded fixtures |
| Steps and stairs | Moderate, 5 to 10 foot candles | Light the treads and risers, avoid shadows |
| Entry door | Moderate | Light the face of visitors and the lock area |
| Driveway and parking | Low to moderate | Motion boost for security |
| Patio and seating | Low and warm, dimmable | Soft light near eye level, avoid bare bulbs |
| Outdoor kitchen task area | Higher, 20 to 30 foot candles | Task lights over the grill and prep |
| Trees and walls | Accent, higher contrast | Narrow beams, aimed carefully |
| Security zones | Motion triggered, higher | Avoid shining into neighbors’ windows |
Color temperature affects mood. Warm white, 2700 to 3000 K, looks natural on stone, wood and plants, and attracts fewer insects. Cool white, 4000 K and above, feels stark and can make landscapes look flat. Use one temperature across the property for consistency. Glare comes from unshielded bulbs and high intensity lights aimed toward eyes, and it makes it harder to see. Shield, recess and aim lights away from the line of sight.
Wiring and Power Considerations
Low voltage systems
A transformer converts 120 volts to 12 volts. Choose a transformer with capacity for your fixtures, with room to grow. Run cable from the transformer along the planned route, with a layout that keeps voltage drop low. A hub or a loop layout balances load. Use waterproof connectors, and bury cable at the recommended depth, often six inches. Mark and protect the route from future digging.
Line voltage circuits
Require GFCI protection, weatherproof boxes, correct wire types, and conduit or direct burial cable buried at the depth that code requires. A permit is typically required for new circuits. Switches, timers and sensors can sit inside the house or in weatherproof boxes outdoors.
Capacity and breakers
Check that the circuit can handle the new load. LED systems use little power, but a long run of fixtures and added outlets for holiday lights or equipment can stress a circuit. Add dedicated circuits where needed. See electrical panel replacement if the panel is full.
Surge protection
Outdoor lighting and pool equipment are exposed to storms. A surge device at the transformer and at the panel protects it. See surge protection.
Outdoor Lighting Maintenance Calendar
| When | Task |
|---|---|
| Monthly | Walk the yard at night, look for dark fixtures, flickering and misaligned beams |
| Spring | Clean lenses, trim plants away from fixtures, check connections for corrosion, reset timers, test GFCIs |
| Summer | Check for water in fixtures after storms, adjust for plant growth, protect from lawn equipment |
| Fall | Remove leaves and debris, check seals, prepare holiday lighting |
| Winter | Check for ice and freeze damage, test sensors, adjust timers for longer nights |
| Every few years | Replace worn lenses and gaskets, reposition fixtures, update controls |
Outdoor Lighting for Specific Home Features
Front entry and curb appeal
A well lit entry welcomes guests and discourages intruders. Use wall lanterns on both sides of the door or a single large fixture, with warm white LEDs. Light the house number so emergency services can find you. Add a few uplights on a tree or the facade. Light the path from the street or the driveway to the door. Use a photocell or a smart schedule, so lights are on when you arrive home after dark.
Garage and driveway
Wall mounted fixtures at the garage door, a motion floodlight on the driveway and low lights along the edges give safety and security. Avoid shining into the street or neighboring homes.
Backyard and play areas
Soft lighting for patios, steps and play structures supports evening use. Keep light low on play areas, to avoid glare. Use motion sensors on side gates and dark corners.
Pools and spas
Use rated underwater lights and bonded, GFCI protected circuits. Add path lights around the deck and step lights where the pool meets the patio. Avoid placing fixtures where water spray and chlorine corrode them, or choose resistant materials.
Gardens and trees
Accent unique specimens with uplights, and use shielded downlights to wash a bed with soft light. Keep light levels subtle. The goal is a sense of depth.
Pergolas, gazebos and covered porches
String lights, ceiling fixtures, wall sconces and fans with lights, all damp or wet rated. Dimmers add flexibility. See ceiling fan installation.
Outdoor Lighting Mistakes to Avoid
- Too bright. Over lighting makes the yard look like a parking lot, and wastes energy.
- Bare, unshielded bulbs. Cause glare and make it hard to see into shadows.
- Fixtures too close together or too far apart. Create hot spots and dark gaps.
- Poor cable routing. Shallow cables get cut by lawn equipment, and long runs lose voltage.
- Skipping GFCI protection and weatherproofing. A safety risk.
- Cool white light everywhere. It looks harsh against plants and stone.
- No plan for growth. Plants grow, and lights end up buried.
- Ignoring neighbors and rules. Light trespass causes disputes.
- Buying very cheap fixtures. Thin plastic fails quickly in Texas sun.
- Forgetting controls. Lights that depend on you remembering a switch are often off or left on all night.
Outdoor Lighting Across Dallas Fort Worth
We design and install outdoor lighting in Dallas and nearby cities. Many Southlake and Frisco homes have large lots and outdoor kitchens, while older Dallas and Fort Worth neighborhoods have mature trees that make beautiful uplighting subjects. Tell us about your yard, and we will propose a plan. See Southlake, Frisco, Fort Worth and Arlington for local details.
Outdoor Lighting — Frequently Asked Questions
How long does outdoor lighting installation take?
A small project takes a day. A large landscape with multiple zones takes several days.
Can I add lights later?
Yes, if the system has capacity. Plan for expansion at the start.
How deep should low voltage cable be buried?
Often about six inches, per manufacturer and local rules. Deeper in areas with digging or traffic.
Do I need an electrician for low voltage lighting?
The low voltage side is simpler, though the connection to the transformer and any line voltage work should be done by a licensed electrician.
Can I mix brands of fixtures?
It is possible, but matching voltages, connectors and colors takes care. A single brand simplifies service.
How do I stop insects at outdoor lights?
Use warm white or amber LEDs, keep fixtures sealed and clean, and avoid lighting near open doors.
Can I install landscape lighting myself?
Low voltage kits are DIY friendly. A line voltage connection and a professional layout are best left to a licensed electrician.
Are solar lights a good option?
They are easy and need no wiring, and their brightness and run time are limited. They suit accent and path lighting in sunny spots.
How much does it cost to run outdoor LED lights?
Very little. A set of low voltage LED lights uses the energy of a few light bulbs.
Will outdoor lights increase my home’s value?
They improve curb appeal and safety, which many buyers value.
What is an in use outlet cover?
A weatherproof cover that stays closed over a plugged in cord, protecting from rain.
How long do outdoor LED lights last?
Often 20,000 to 50,000 hours, which is many years. Quality of the fixture and its environment matter.
How many outdoor lights do I need?
It depends on the size of the property and your goals. A designer maps the layout so lights are spaced for coverage without glare.
Can I add outdoor lights to an existing circuit?
Sometimes, if the circuit has capacity and GFCI protection. Larger systems need new circuits.
Do I need a permit for outdoor lighting?
Line voltage work may need one. Low voltage often does not, but the connection to power does.
What is voltage drop in low voltage lighting?
Voltage lost over long cable runs, which makes distant lights dim. Proper cable size and layout fix it.
Can outdoor lights attract insects?
Yes. Warm white or amber LEDs attract fewer insects than cool white lights.
How much does outdoor lighting cost in Dallas?
It depends on the number of fixtures, the wiring and the controls. Plumber Service TX gives a written flat rate quote, and you approve it before work begins.
What is landscape lighting?
Fixtures that light paths, trees, walls and features at night, usually low voltage LED.
Is low voltage lighting safer than line voltage?
Low voltage runs at 12 volts, which lowers shock risk, and is easier to adjust and expand.
Do outdoor lights need a permit?
Line voltage work usually does. Low voltage often does not, but the transformer connection may.
How many lights do I need?
It depends on the property. A designer plans the layout and spacing, so you do not overlight.
Can outdoor lights be on timers or smart controls?
Yes, with timers, photocells and app controls.
What color temperature is best outdoors?
Warm white, around 2700 K, works well for most homes.
Are LED outdoor lights worth it?
Yes. They use less power, last longer and withstand weather better.
Need outdoor lighting in DFW today?
Email service@plumberservicetx.com and our dispatch team will confirm your same-day or next-day appointment window.